panca logam menu left
panca logam menu right
panca logam company logo

In 1997 as a result of privatisation ELEKTRIM S.A., Warsaw became an owner of 70% of company's shares. The same year ELEKTRIM decided to form a capital group Elektrim-Motor on a basis of domestic manufacturers of electric motors, including also Besel, Indukta and Celma.

 


Franklin Motor
Baldor Motor
Cantoni Motor

Home Products Italvibras Italvibras - MVSI Electric Vibrators
Italvibras - MVSI Electric Vibrators PDF Print E-mail

Italvibras - MVSI Vibromotor

Category: II 2 D
Level of protection: tD A21 IP66
EC Certificate: LCIE 05 ATEX 6163 X

Temperature class: see technical details
Areas of use: 21, 22

The MVSI series represents the line of reference products for manufacturer’s of vibrating machines and plants operating in many industrial sectors and is made up of the largest range on the market, with centrifugal force values up to 30500 Kgf (300kN).
The MVSI series has been conceived to guarantee higher performance in all conditions and environments and complies with the most recent IEC and EN international standards for use in atmospheres with potentially explosive powders. In particular, the MVSI series can be used in areas 21 and 22.

 

General features

 

Power supply

Three-phase voltage from 24V to 690V, 50Hz or 60Hz or single−phase 100-130V, 60Hz and 200-240V, 50Hz (single-phase types are supplied without capacitor);suitable for use with an inverter from 20Hz to the base frequency with constant torque load profile.

Polarity
2, 4, 6 and 8 standard poles, 10 and 12 poles on request.

Functioning
Continual service (S1) at maximum declared centrifugal force and electric power.

Centrifugal force
Range extended up to 30500 Kgf.

(300 kN).

Insulation class
Class F (155°C), class H (180°C) on request.

Electric motor
Three-phase asynchronous type.  Insulated windings using vacuum encapsulating up to size 35; using the “drop by drop” trickle system with class H resin for larger sizes.Rotor is die cast alluminium.

 

Downloads

pdfCatalog

pdfManual

pdfTechnical details

pdf2 poles - 3000/3600 rpm

pdf4 poles - 1500/1800 rpm

pdf6 poles - 1000/1200 rpm

pdf8 poles - 750/900 rpm

 


PT. Panca Logam Teknik Abadi
Address: Jl. Pangeran Jayakarta 141 Blok F No. 5, Jakarta Pusat 10730, INDONESIA
E-mail: sales@pancalogam-teknikabadi.com Tel: +62-21-6282005(Hunting), 6295715 Fax: +62-21-6282002, 6295455, 22621308


Copyright © 2019 PT. Panca Logam Teknik Abadi. All Rights Reserved.
Send feed back about this website to Webmaster